What we do:

Nylatron Specs

        NYLATRON GS FILLED NYLON NYLATRON NS FILLED NYLON NYLATRON GSM NYLON NYLATRON GSM-BLUE NYLON NYLATRON NSM NYLON MC 901 BLUE NYLON MC 904 BLUE NYLON MC 907 NATURAL NYLON ST801 NYLON HYDLAR ZF NYLON HYDLAR ZF NYLON
    Units ASTM Test Method MoS2 FILLED TYPE 6/6 POLYAMIDE LUBRICATED TYPE 6/6 POLYAMIDE MoS2 FILLED TYPE 6 POLYAMIDE LUBRICATED TYPE 6 POLYAMIDE LUBRICATED TYPE 6 POLYAMIDE MONOCAST HEAT STABILIZED TYPE 6 POLYAMIDE PLASTICIZED HEAT STABILIZED TYPE 6 POLYAMIDE MONOCAST FDA TYPE 6 POLYAMIDE IMPACT MODIFIED TYPE 6/6 POLYAMIDE ARAMID-FILLED TYPE 6/6 POLYAMIDE 30% GLASS-FILLED BLACK NYLON
MECHANICAL Strength to Weight Ratio ksi -                      
Specific Gravity @73 F - D792 1.16 1.18 1.16 1.15 1.15 1.15 1.15 1.15 1.08 1.19 1.36
Tensile Strength @73 F, (ult)/(yld) psi D638 12500 (ult) 10500(ult) 10500(ult) 10000(ult) 11000(ult) 11000(ult) 9500(ult) 12000(ult) 6000(yld) 17300(yld) 13388(ult)
Tensile Modulus of Elasticity @ 73 F psi D638 480000 410000 400000 500000 410000 400000 275000 400000 - 802000 654620
Tensile Elongation at Break @ 73 F % D638 25 10 30 35 20 20 50 20 210 4 7
Flexural Strength @ 73 F psi D790 17000 14000 16000 15000 16000 16000 - 16000 - 21300 20550
Flexural Modulus of Elasticity @ 73 F psi D790 460000 400000 500000 500000 475000 500000 - 500000 245000 664000 723500
Shear Strength @ 73 F psi D732 10500 9000 10500 - 10000 11000 - 11000 8400 - -
Compressive Strength, (% Deformation) @73 F psi D695 160000(10) 12000(10) 14000(10) 13000(10) 14000(10) 15000(10) - 15000(10) - 19300(10) 18070(10)
Compressive Modulus of Elasticity @73 F psi D695 420000 400000 400000 425000 400000 400000 - 400000 - - -
Hardness, Rockwell, Scale as noted @73 F - D785 M85(R115) M85(R115) M80(R110) M80(R117) M80(R115) M85(R115) M70 M85(R115) (R112) M80(R121) M65(R121)
Hardness, Durometer, Shore D @73 F - D2240 D85 D85 D85 - D85 D85 D85 D85 - - -
Izod Impact, (Notched) @73 F ft-lb/in of notch D256 TypeA 0.5 0.4 0.5 0.9 0.5 0.4 - 0.4 17.0 1.2 2.3
Coefficient of Friction, (Dry vs. Steel) Dynamic - - 0.20 0.16 0.20 0.18 .078 0.20 - 0.20 0.28 0.32 -
Limiting PV, (with 4 to 1 factor of safety applied) psi-ft/min - 3000 10000 3000 3800 12300 3000 - 3000 - - -
THERMAL Coefficient of Linear Thermal Expansion @73 F in/in/F E-831 (TMA) 4.0E-05 5.5E-05 5.0E-05 5.9E-05 5.0E-05 3.5E-05 3.5E-05 3.5E-05 6.7E-05 3.5E-05 1.7E-05
Heat Deflection Temperature @ 264 psi F D648 200 200 200 - 200 200 200 200 160 - 413
Tg-Glass transition temperature, (Amorphous) F D3418 - - - - - - - - - - 420
Melting Point, (VS=Vicat Softening Temp.) F D3418 500 500 420 420 420 420 420 420 491 491 -
Continuous Service Temperature in Air, (Max.) F - 220 220 200 200 200 260 - 200 - 300 -
Thermal Conductivity BTU-in/hr-ft2-F - 1.7 - - - - - - - - - -
ELECTRICAL Dielectric Strength, Short Term Volts/mil D149 350 350 400 - 400 500 - 500 - 350 -
Volume Resistivity ohm-cm D257 2.5E+13 2.5E+13 2.5E+13 - 2.5E+13 2.5E+13 - 2.5E+13 1.0E+14 1.0E+15 -
Dielectric Constant @ 10E6 Hz - D150 - - 3.7 - - 3.7 3.7 3.7 2.9 3.4 -
Dissipation Factor @ 10E6 Hz - D150 - - - - - - - - 0.020 0.010 -
Flammability @ 3.1 mm unless noted - UL94 V-2 HB HB HB HB HB HB HB HB(0.81mm) - -
H20 Water Absorbtion, Immersion, 24 Hrs % by wt. D570(7) 0.30 0.30 0.30 0.22 0.25 0.30 0.30 0.30 1.20 1.20 -
Water Absorbtion, Saturation % by wt. D570(7) 7.00 7.00 7.00 7.00 7.00 7.00 7.00 7.00 6.70 8.50 -

 

Contact us

By submitting this form, you accept the Mollom privacy policy.

Testing Title Inquiry Form

By submitting this form, you accept the Mollom privacy policy.