What we do:

Nomex Specs


        Nomex Type 410
    Units ASTM Test Method Aromatic Polyamide (Aramid) Paper
MECHANICAL Strength to Weight Ratio ksi -  
Specific Gravity @73 F - D792 0.7 - 1.2
Tensile Strength @73 F, (ult)/(yld) psi D638 548
Tensile Modulus of Elasticity @ 73 F psi D638 -
Tensile Elongation at Break @ 73 F % D638 -
Flexural Strength @ 73 F psi D790 -
Flexural Modulus of Elasticity @ 73 F psi D790 -
Shear Strength @ 73 F psi D732 -
Compressive Strength, (% Deformation) @73 F psi D695 -
Compressive Modulus of Elasticity @73 F psi D695 -
Hardness, Rockwell, Scale as noted @73 F - D785 -
Hardness, Durometer, Shore D @73 F - D2240 -
Izod Impact, (Notched) @73 F ft-lb/in of notch D256 TypeA -
Coefficient of Friction, (Dry vs. Steel) Dynamic - - -
Limiting PV, (with 4 to 1 factor of safety applied) psi-ft/min - -
THERMAL Coefficient of Linear Thermal Expansion @73 F in/in/F E-831 (TMA) -
Heat Deflection Temperature @ 264 psi F D648 -
Tg-Glass transition temperature, (Amorphous) F D3418 -
Melting Point, (VS=Vicat Softening Temp.) F D3418 -
Continuous Service Temperature in Air, (Max.) F - -
Thermal Conductivity BTU-in/hr-ft2-F - -
ELECTRICAL Dielectric Strength, Short Term Volts/mil D149 815
Volume Resistivity ohm-cm D257 2.0E+16
Dielectric Constant @ 10E6 Hz - D150 2.7
Dissipation Factor @ 10E6 Hz - D150 .006
Flammability @ 3.1 mm unless noted - UL94 -
H20 Water Absorbtion, Immersion, 24 Hrs % by wt. D570(7) -
Water Absorbtion, Saturation % by wt. D570(7)

Contact us

By submitting this form, you accept the Mollom privacy policy.

Testing Title Inquiry Form

By submitting this form, you accept the Mollom privacy policy.