What we do:

Linen Phenolic Specs







        L, LE
    Units ASTM Test Method Linen Phenolic
MECHANICAL Strength to Weight Ratio ksi -  
Specific Gravity @73 F - D792 1.34
Tensile Strength @73 F, (ult)/(yld) psi D638 12500
Tensile Modulus of Elasticity @ 73 F psi D638 -
Tensile Elongation at Break @ 73 F % D638 -
Flexural Strength @ 73 F psi D790 15000
Flexural Modulus of Elasticity @ 73 F psi D790 1050000
Shear Strength @ 73 F psi D732 11750
Compressive Strength, (% Deformation) @73 F psi D695 37000 (10)
Compressive Modulus of Elasticity @73 F psi D695 -
Hardness, Rockwell, Scale as noted @73 F - D785 M105
Hardness, Durometer, Shore D @73 F - D2240 -
Izod Impact, (Notched) @73 F ft-lb/in of notch D256 TypeA 2.5/1.8
Coefficient of Friction, (Dry vs. Steel) Dynamic - - -
Limiting PV, (with 4 to 1 factor of safety applied) psi-ft/min - -
THERMAL Coefficient of Linear Thermal Expansion @73 F in/in/F E-831 (TMA) -
Heat Deflection Temperature @ 264 psi F D648 -
Tg-Glass transition temperature, (Amorphous) F D3418 -
Melting Point, (VS=Vicat Softening Temp.) F D3418 -
Continuous Service Temperature in Air, (Max.) F - 265
Thermal Conductivity BTU-in/hr-ft2-F - -
ELECTRICAL Dielectric Strength, Short Term Volts/mil D149 150/360
Volume Resistivity ohm-cm D257 -
Dielectric Constant @ 10E6 Hz - D150 -,5.8
Dissipation Factor @ 10E6 Hz - D150 .1,.055
Flammability @ 3.1 mm unless noted - UL94 HB
H20 Water Absorbtion, Immersion, 24 Hrs % by wt. D570(7) .9,.7
Water Absorbtion, Saturation % by wt. D570(7)

 

Contact us

By submitting this form, you accept the Mollom privacy policy.

Testing Title Inquiry Form

By submitting this form, you accept the Mollom privacy policy.